Schaltplan - Verkabelung - Druckversion +- BMWRaspControl - Forum (https://www.bmwraspcontrol.de/board) +-- Forum: BMWRaspControl - Diskussion (https://www.bmwraspcontrol.de/board/forumdisplay.php?fid=13) +--- Forum: BMWRaspControl - Hardware (https://www.bmwraspcontrol.de/board/forumdisplay.php?fid=27) +--- Thema: Schaltplan - Verkabelung (/showthread.php?tid=213) |
RE: Schaltplan - Verkabelung - kuncik - 14.09.2021 (11.09.2021, 23:56)harryberlin schrieb: try this image: https://drive.google.com/file/d/1_s-qObke4Qk0PRZXL49pMsChshbFJvs2/view?usp=sharing Hello. I tried the osmc_ibus_usb_2020.10-1.img.gz image. When switching modes, a simulated changer appears, but there is no picture. Is it possible the problem is because I am using NTSC wire? If I am going to output the image through gpio7, what power should I use a 100 ohm resistor? RE: Schaltplan - Verkabelung - harryberlin - 15.09.2021 can you activate logging in the addon and send the log file? RE: Schaltplan - Verkabelung - kuncik - 15.09.2021 (15.09.2021, 12:19)Гарриберлин schrieb: можно активировать вход в аддон и отправить файл журнала? Hello. RE: Schaltplan - Verkabelung - harryberlin - 15.09.2021 1. log level is not enabled. 2. there is no log from car included. 3. on sd card should be a folder "ibuscommunicator" with zipped logfiles. RE: Schaltplan - Verkabelung - kuncik - 19.09.2021 (15.09.2021, 20:30)harryberlin schrieb: 1. log level is not enabled. Hello. After connecting to the machine, three zip files appeared. RE: Schaltplan - Verkabelung - harryberlin - 19.09.2021 in every logfile the lig level is set to None. so, nothing is logged. RE: Schaltplan - Verkabelung - kuncik - 19.09.2021 (19.09.2021, 19:37)harryberlin schrieb: in every logfile the lig level is set to None. What items do I need to include? Today I activated GPIO7 and got an image on the screen. I don't understand why there is no picture via NTSC. If I can't get the image via NTSC, I will use GPIO7. What power should the 100Ω resistor be? RE: Schaltplan - Verkabelung - harryberlin - 20.09.2021 just usual resistor, which has 2-3mm diameter strange thing, that ntsc wire is not working. RE: Schaltplan - Verkabelung - kuncik - 16.10.2021 (20.09.2021, 12:25)harryberlin schrieb: just usual resistor, which has 2-3mm diameter Hi. I contacted Resler support regarding the green NTSC wire. Answer : The green wire is no longer controlled by the DTR on the COM port, but is now controlled by a special IBUS telegram. RE: Schaltplan - Verkabelung - harryberlin - 16.10.2021 do you have resler interface or the new resler modul? ntsc wire of resler interface is controlled by RTS. |