+- BMWRaspControl - Forum (https://www.bmwraspcontrol.de/board)
+-- Forum: BMWRaspControl - Diskussion (https://www.bmwraspcontrol.de/board/forumdisplay.php?fid=13)
+--- Forum: BMWRaspControl - HelgeInterface (obsolete) (https://www.bmwraspcontrol.de/board/forumdisplay.php?fid=14)
+--- Thema: [solved] No image and no PDC given on-board (/showthread.php?tid=228)
Seiten:
1
2
No image and no PDC given on-board - 390186 - 24.09.2015
Solved the problem of the back button (bmw e83), now I can not see the window PDC and even the values of the vehicle tab ON-board
V02.11.3
Greetings
RE: No image and no PDC given on-board - 390186 - 25.09.2015
A little help
RE: No image and no PDC given on-board - harryberlin - 25.09.2015
1. take navcoder
2. use pdc test
3. start pdc test
4. turn on pdc in your
5. turn off pdc in your car
6. stop pdc test
7. close navcoder
8. send the full logfile from navecoder path to us.
on board is not working at the moment.
RE: No image and no PDC given on-board - 390186 - 25.09.2015
Hello, I managed to create the file with navcoder, and I noticed that the front passenger's side sensor is not working
RE: No image and no PDC given on-board - harryberlin - 25.09.2015
was your pdc turned off before starting log with navcoder?
there is no message from pdc, when it was turned on.
so it is not possible for you, at the moment.
RE: No image and no PDC given on-board - 390186 - 25.09.2015
ok, wrong procedure, I try again to take the test again
ok, test redone
I hope that this time they are ok
RE: No image and no PDC given on-board - harryberlin - 25.09.2015
the messages are the same like e39.
it should work in your case.
do you have the pdc config in your HelgeInterface.xml?
RE: No image and no PDC given on-board - 390186 - 26.09.2015
Ok, here is the file
Greetings
RE: No image and no PDC given on-board - 390186 - 26.09.2015
hello guys, there's the skin test PDC
what can I do?
I have
1 image
2 video
3 on-board
4 music
5 Favourites
6 settings
7 volume
Greetings
RE: No image and no PDC given on-board - harryberlin - 26.09.2015
pdc should work. i don't know why it is not working for you?