Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
[FeatureRequest] CIS-IBUS Integration
#91
mach mal ein neustart, dann sollte wieder 0 stehen. hatte ich auch gerade.
weiter als syspath not found komme ich auch nicht

aber wie gesagt, bei mir läuft die ID des CIS genauso.
weiß nicht was da mit dem richtigen CIS anders ist.
Antworten
#92
Mir ist eingefallen dass ich noch die 94-cis-ibus.rules-datei im rules.d Ordner hatte, nachdem ich diese gelöscht habe taucht ttyUSB0 anstatt ttyUSB1 auf (habe nachdem die rules Datei gelöscht war neu gestartet also könnte auch daran gelegen haben)

Mit udevadm info /dev/ttyUSB0  ohne -a oder -p flag gibt er mir folgendes aus
Code:
osmc@osmc:~$ udevadm info /dev/ttyUSB0
P: /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/ttyUSB0/tty/ttyUSB0
N: ttyUSB0
S: serial/by-id/usb-Silicon_Labs_CIS-IBUS_0001-if00-port0
S: serial/by-path/platform-20980000.usb-usb-0:1.3:1.0-port0
E: DEVLINKS=/dev/serial/by-id/usb-Silicon_Labs_CIS-IBUS_0001-if00-port0 /dev/serial/by-path/platform-20980000.usb-usb-0:1.3:1.0-port0
E: DEVNAME=/dev/ttyUSB0
E: DEVPATH=/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/ttyUSB0/tty/ttyUSB0
E: ID_BUS=usb
E: ID_MODEL=CIS-IBUS
E: ID_MODEL_ENC=CIS-IBUS
E: ID_MODEL_ID=85eb
E: ID_PATH=platform-20980000.usb-usb-0:1.3:1.0
E: ID_PATH_TAG=platform-20980000_usb-usb-0_1_3_1_0
E: ID_REVISION=0100
E: ID_SERIAL=Silicon_Labs_CIS-IBUS_0001
E: ID_SERIAL_SHORT=0001
E: ID_TYPE=generic
E: ID_USB_DRIVER=cp210x
E: ID_USB_INTERFACES=:ff0000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Silicon_Labs
E: ID_VENDOR_ENC=Silicon\x20Labs
E: ID_VENDOR_FROM_DATABASE=Cygnal Integrated Products, Inc.
E: ID_VENDOR_ID=10c4
E: MAJOR=188
E: MINOR=0
E: SUBSYSTEM=tty
E: TAGS=:systemd:
E: USEC_INITIALIZED=400740


Angehängte Dateien Thumbnail(s)
   
Antworten
#93
das kommt bei mir  raus

Spoiler!
Code:
P: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/ttyUSB0/tty/ttyUSB0
N: ttyUSB0
S: serial/by-id/usb-Silicon_Labs_IBUS-IF_0001-if00-port0
S: serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0-port0
E: DEVLINKS=/dev/serial/by-id/usb-Silicon_Labs_IBUS-IF_0001-if00-port0 /dev/serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0-port0
E: DEVNAME=/dev/ttyUSB0
E: DEVPATH=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/ttyUSB0/tty/ttyUSB0
E: ID_BUS=usb
E: ID_MODEL=IBUS-IF
E: ID_MODEL_ENC=IBUS-IF
E: ID_MODEL_ID=85ea
E: ID_PATH=platform-3f980000.usb-usb-0:1.3:1.0
E: ID_PATH_TAG=platform-3f980000_usb-usb-0_1_3_1_0
E: ID_REVISION=0202
E: ID_SERIAL=Silicon_Labs_IBUS-IF_0001
E: ID_SERIAL_SHORT=0001
E: ID_TYPE=generic
E: ID_USB_DRIVER=cp210x
E: ID_USB_INTERFACES=:ff0000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Silicon_Labs
E: ID_VENDOR_ENC=Silicon\x20Labs
E: ID_VENDOR_FROM_DATABASE=Cygnal Integrated Products, Inc.
E: ID_VENDOR_ID=10c4
E: MAJOR=188
E: MINOR=0
E: SUBSYSTEM=tty
E: TAGS=:systemd:
E: USEC_INITIALIZED=12581

und das kriege ich wenn ich -a -p und den DEVPATH nehme:

Spoiler!
Code:
osmc@osmc:~$ sudo udevadm info -a -p /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/ttyUSB0/tty/ttyUSB0

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/ttyUSB0/tty/ttyUSB0':
    KERNEL=="ttyUSB0"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/ttyUSB0':
    KERNELS=="ttyUSB0"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="cp210x"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0':
    KERNELS=="1-1.3:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="cp210x"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="00"
    ATTRS{bInterfaceProtocol}=="00"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{authorized}=="1"
    ATTRS{supports_autosuspend}=="1"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{interface}=="IBUS-IF"

  looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3':
    KERNELS=="1-1.3"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{devpath}=="1.3"
    ATTRS{idVendor}=="10c4"
    ATTRS{speed}=="12"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="4"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}=="100mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="80"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="0"
    ATTRS{bcdDevice}=="0202"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{serial}=="0001"
    ATTRS{version}==" 1.10"
    ATTRS{urbnum}=="11"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}=="Silicon Labs"
    ATTRS{removable}=="removable"
    ATTRS{idProduct}=="85ea"
    ATTRS{bDeviceClass}=="00"
    ATTRS{product}=="IBUS-IF"

  looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1':
    KERNELS=="1-1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="02"
    ATTRS{devpath}=="1"
    ATTRS{idVendor}=="0424"
    ATTRS{speed}=="480"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="2"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}=="2mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="5"
    ATTRS{bcdDevice}=="0200"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{version}==" 2.00"
    ATTRS{urbnum}=="76"
    ATTRS{ltm_capable}=="no"
    ATTRS{removable}=="unknown"
    ATTRS{idProduct}=="9514"
    ATTRS{bDeviceClass}=="09"

  looking at parent device '/devices/platform/soc/3f980000.usb/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="01"
    ATTRS{devpath}=="0"
    ATTRS{idVendor}=="1d6b"
    ATTRS{speed}=="480"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{authorized_default}=="1"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="1"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}=="0mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="1"
    ATTRS{interface_authorized_default}=="1"
    ATTRS{bcdDevice}=="0404"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{serial}=="3f980000.usb"
    ATTRS{version}==" 2.00"
    ATTRS{urbnum}=="26"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}=="Linux 4.4.6-3-osmc dwc_otg_hcd"
    ATTRS{removable}=="unknown"
    ATTRS{idProduct}=="0002"
    ATTRS{bDeviceClass}=="09"
    ATTRS{product}=="DWC OTG Controller"

  looking at parent device '/devices/platform/soc/3f980000.usb':
    KERNELS=="3f980000.usb"
    SUBSYSTEMS=="platform"
    DRIVERS=="dwc_otg"
    ATTRS{hnp}=="HstNegScs = 0x0"
    ATTRS{srp}=="SesReqScs = 0x1"
    ATTRS{regvalue}=="invalid offset"
    ATTRS{hsic_connect}=="HSIC Connect = 0x1"
    ATTRS{guid}=="GUID = 0x2708a000"
    ATTRS{mode}=="Mode = 0x1"
    ATTRS{srpcapable}=="SRPCapable = 0x1"
    ATTRS{regdump}=="Register Dump"
    ATTRS{gpvndctl}=="GPVNDCTL = 0x00000000"
    ATTRS{ggpio}=="GGPIO = 0x00000000"
    ATTRS{hprt0}=="HPRT0 = 0x00001405"
    ATTRS{wr_reg_test}=="Time to write GNPTXFSIZ reg 10000000 times: 590 msecs (59 jiffies)"
    ATTRS{driver_override}=="(null)"
    ATTRS{hcd_frrem}=="HCD Dump Frame Remaining"
    ATTRS{mode_ch_tim_en}=="Mode Change Ready Timer Enable = 0x0"
    ATTRS{gnptxfsiz}=="GNPTXFSIZ = 0x01000306"
    ATTRS{remote_wakeup}=="Remote Wakeup Sig = 0 Enabled = 0 LPM Remote Wakeup = 0"
    ATTRS{busconnected}=="Bus Connected = 0x1"
    ATTRS{hcddump}=="HCD Dump"
    ATTRS{gotgctl}=="GOTGCTL = 0x001c0001"
    ATTRS{spramdump}=="SPRAM Dump"
    ATTRS{grxfsiz}=="GRXFSIZ = 0x00000306"
    ATTRS{gsnpsid}=="GSNPSID = 0x4f54280a"
    ATTRS{gusbcfg}=="GUSBCFG = 0x20001700"
    ATTRS{hptxfsiz}=="HPTXFSIZ = 0x02000406"
    ATTRS{devspeed}=="Device Speed = 0x0"
    ATTRS{fr_interval}=="Frame Interval = 0x1d4c"
    ATTRS{rem_wakeup_pwrdn}==""
    ATTRS{bussuspend}=="Bus Suspend = 0x0"
    ATTRS{buspower}=="Bus Power = 0x1"
    ATTRS{hnpcapable}=="HNPCapable = 0x1"
    ATTRS{rd_reg_test}=="Time to read GNPTXFSIZ reg 10000000 times: 1620 msecs (162 jiffies)"
    ATTRS{enumspeed}=="Device Enumeration Speed = 0x1"
    ATTRS{inv_sel_hsic}=="Invert Select HSIC = 0x0"
    ATTRS{regoffset}=="0xffffffff"

  looking at parent device '/devices/platform/soc':
    KERNELS=="soc"
    SUBSYSTEMS=="platform"
    DRIVERS==""
    ATTRS{driver_override}=="(null)"

  looking at parent device '/devices/platform':
    KERNELS=="platform"
    SUBSYSTEMS==""
    DRIVERS==""
Antworten
#94
Hier analog dazu was bei mir kommt, ich kann damit aber wenig anfangen...

Spoiler!
Code:
osmc@osmc:~$ sudo udevadm info -a -p /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/ttyUSB0/tty/ttyUSB0

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/ttyUSB0/tty/ttyUSB0':
    KERNEL=="ttyUSB0"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/ttyUSB0':
    KERNELS=="ttyUSB0"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="cp210x"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.0':
    KERNELS=="1-1.3:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="cp210x"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="00"
    ATTRS{bInterfaceProtocol}=="00"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{supports_autosuspend}=="1"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{interface}=="CIS-IBUS"

  looking at parent device '/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3':
    KERNELS=="1-1.3"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{devpath}=="1.3"
    ATTRS{idVendor}=="10c4"
    ATTRS{speed}=="12"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="5"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}=="100mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="80"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="0"
    ATTRS{bcdDevice}=="0100"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{serial}=="0001"
    ATTRS{version}==" 1.10"
    ATTRS{urbnum}=="515363"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}=="Silicon Labs"
    ATTRS{removable}=="removable"
    ATTRS{idProduct}=="85eb"
    ATTRS{bDeviceClass}=="00"
    ATTRS{product}=="CIS-IBUS"

  looking at parent device '/devices/platform/soc/20980000.usb/usb1/1-1':
    KERNELS=="1-1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="02"
    ATTRS{devpath}=="1"
    ATTRS{idVendor}=="0424"
    ATTRS{speed}=="480"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="2"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}=="2mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="3"
    ATTRS{bcdDevice}=="0200"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{version}==" 2.00"
    ATTRS{urbnum}=="41"
    ATTRS{ltm_capable}=="no"
    ATTRS{removable}=="unknown"
    ATTRS{idProduct}=="9512"
    ATTRS{bDeviceClass}=="09"

  looking at parent device '/devices/platform/soc/20980000.usb/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="01"
    ATTRS{devpath}=="0"
    ATTRS{idVendor}=="1d6b"
    ATTRS{speed}=="480"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{authorized_default}=="1"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="1"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}=="0mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="1"
    ATTRS{bcdDevice}=="0403"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{serial}=="20980000.usb"
    ATTRS{version}==" 2.00"
    ATTRS{urbnum}=="25"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}=="Linux 4.3.3-3-osmc dwc_otg_hcd"
    ATTRS{removable}=="unknown"
    ATTRS{idProduct}=="0002"
    ATTRS{bDeviceClass}=="09"
    ATTRS{product}=="DWC OTG Controller"

  looking at parent device '/devices/platform/soc/20980000.usb':
    KERNELS=="20980000.usb"
    SUBSYSTEMS=="platform"
    DRIVERS=="dwc_otg"
    ATTRS{hnp}=="HstNegScs = 0x0"
    ATTRS{srp}=="SesReqScs = 0x1"
    ATTRS{regvalue}=="invalid offset"
    ATTRS{hsic_connect}=="HSIC Connect = 0x1"
    ATTRS{guid}=="GUID = 0x2708a000"
    ATTRS{mode}=="Mode = 0x1"
    ATTRS{srpcapable}=="SRPCapable = 0x1"
    ATTRS{regdump}=="Register Dump"
    ATTRS{gpvndctl}=="GPVNDCTL = 0x00000000"
    ATTRS{ggpio}=="GGPIO = 0x00000000"
    ATTRS{hprt0}=="HPRT0 = 0x00001405"
    ATTRS{wr_reg_test}=="Time to write GNPTXFSIZ reg 10000000 times: 850 msecs (85 jiffies)"
    ATTRS{driver_override}=="(null)"
    ATTRS{hcd_frrem}=="HCD Dump Frame Remaining"
    ATTRS{mode_ch_tim_en}=="Mode Change Ready Timer Enable = 0x0"
    ATTRS{gnptxfsiz}=="GNPTXFSIZ = 0x01000306"
    ATTRS{remote_wakeup}=="Remote Wakeup Sig = 0 Enabled = 0 LPM Remote Wakeup = 0"
    ATTRS{busconnected}=="Bus Connected = 0x1"
    ATTRS{hcddump}=="HCD Dump"
    ATTRS{gotgctl}=="GOTGCTL = 0x001c0001"
    ATTRS{spramdump}=="SPRAM Dump"
    ATTRS{grxfsiz}=="GRXFSIZ = 0x00000306"
    ATTRS{gsnpsid}=="GSNPSID = 0x4f54280a"
    ATTRS{gusbcfg}=="GUSBCFG = 0x20001700"
    ATTRS{hptxfsiz}=="HPTXFSIZ = 0x02000406"
    ATTRS{devspeed}=="Device Speed = 0x0"
    ATTRS{fr_interval}=="Frame Interval = 0x1d4c"
    ATTRS{rem_wakeup_pwrdn}==""
    ATTRS{bussuspend}=="Bus Suspend = 0x0"
    ATTRS{buspower}=="Bus Power = 0x1"
    ATTRS{hnpcapable}=="HNPCapable = 0x1"
    ATTRS{rd_reg_test}=="Time to read GNPTXFSIZ reg 10000000 times: 1560 msecs (156 jiffies)"
    ATTRS{enumspeed}=="Device Enumeration Speed = 0x1"
    ATTRS{inv_sel_hsic}=="Invert Select HSIC = 0x0"
    ATTRS{regoffset}=="0xffffffff"

  looking at parent device '/devices/platform/soc':
    KERNELS=="soc"
    SUBSYSTEMS=="platform"
    DRIVERS==""
    ATTRS{driver_override}=="(null)"

  looking at parent device '/devices/platform':
    KERNELS=="platform"
    SUBSYSTEMS==""
    DRIVERS==""
Komisch aber der resler mit der CIS-ID auch läuft. War das Umschreiben auch sicher erfolgreich?
Antworten
#95
jup, hatte die ID vom CIS. musste extra die treiber inf anpassen, weil ich nicht den treiber von ac-services da hatte.
Antworten
#96
Okay hoffentlich werfe ich nix durcheinander:

CIS-IBUS:

Code:
looking at parent device '/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.0':
   KERNELS=="1-1.3:1.0"
   SUBSYSTEMS=="usb"
   DRIVERS=="cp210x"
   ATTRS{bInterfaceClass}=="ff"
   ATTRS{bInterfaceSubClass}=="00"
   ATTRS{bInterfaceProtocol}=="00"
   ATTRS{bNumEndpoints}=="02"
   ATTRS{supports_autosuspend}=="1"
   ATTRS{bAlternateSetting}==" 0"
   ATTRS{bInterfaceNumber}=="00"
   ATTRS{interface}=="CIS-IBUS"

Resler:

Code:
 looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0':
   KERNELS=="1-1.3:1.0"
   SUBSYSTEMS=="usb"
   DRIVERS=="cp210x"
   ATTRS{bInterfaceClass}=="ff"
   ATTRS{bInterfaceSubClass}=="00"
   ATTRS{bInterfaceProtocol}=="00"
   ATTRS{bNumEndpoints}=="02"
   ATTRS{authorized}=="1"              <----- Was ist das?
   ATTRS{supports_autosuspend}=="1"
   ATTRS{bAlternateSetting}==" 0"
   ATTRS{bInterfaceNumber}=="00"
   ATTRS{interface}=="IBUS-IF"


Hab noch weitere unterschiede in den Ausgaben gesehen ich vermute aber die ändern nix.
Wenn das Resler auch mit der PID des CIS einwandfrei läuft wird das nicht der Fehler sein sofern das jetzt bestätigt ist?
Kann man den Modelnamen vom CIS-IBUS in IBUS-IF ändern?
Antworten
#97
nein, er kann nix ändern, weil die CIS-IBUS gelockt ist.

Ich hatte auch den Name meines Reslersticks auf CIS-IBUS geändert. einziger Unterschied war die Revisionssnummer, da hab ich nix geändert.
Denke aber, das sollte nicht das Problem sein.
Antworten
#98
Kannst du bei deinem Resler mal das "Authorized" weg machen oder auf 0 setzen? Das CIS hat die Eigenschaft garnicht. Ansonsten kann es nur an was anderes liegen.

ATTRS{authorized}=="1"
Antworten
#99
Also der vollständigkeit halber: habe es auch mal unter XP versucht, aber auch da lässt sich die ID nicht ändern.

@N3mesis: hast du mal probiert ob dein Cis am Rasppi mit harrys plugin läuft? Nicht dass es an meinem Pi 1 oder Software liegt....
Antworten
wie bereits geschrieben, dein cis ist locked. es geht nicht mehr umzuschreiben.
ich würde ante einfach mal etwas "nerven", vllt. lässt sich mehr support entlocken.
Antworten


Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste