Schaltplan - Verkabelung

[kuncik]

yes green wire to pin 17 xx18804 = you don't need gpio7

Hello.
I connected the Raspberry pi according to the diagram using the ibus wrestler interface.
green NTSC wire from ibus wrestler interface to connector X18804 (pin 17)
But I have a problem: the car does not see the Raspberry pi.
The MODE button switches between radio and CD.
After connecting, I have a problem when closing / opening the car, the headlights start blinking themselves one by one and the rear left turn signal turns on.
I have tested the circuit several times, the connection is correct.
Software BMWRaspControl V8.0, also tried OSMC mit IBusCommunicator für Raspberry Pi2 + 3 .