Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Hi all, small question
#71
Hi, I just wrote down some notes how far I am with this. I just reinstalled fresh osmc image with your repository. I succeeded to connect to ibus for a while since it showed outside temp. Consumption and all other values didn't work yet. Display buttons doesn't work and GPIO7 won't switch display on - I have to ground VM manually. Audio output is not used yet since BM24 is connected via doubleshielded cable to mbus 6 CD changer where the line inputs should be connected. I begin to found more easier to make an avr to emulate mbus cd changer.

Car is a early 1995 E38 with a new video module and 16:9 display, original MK 1 navigation unit removed. LCM changed from 2005 E53 X5 and coded in car.
Raspberry Pi 3 B with Behringer U-CONTROL UCA222, USB wireless keyboard and Resler IBUS-USB adapter

How I get other onboard computer values visible?
How ibuscommunicator remotes display/steering wheel buttons with kodi?
GPIO7 won't switch to video putput - should I try Reslers NTSC wire?

Aim is to make original display to play bluetooth or airplay audio from phone, music from usb stick and have a obc visible on screen. Maybe later tv stick and navigator would be nice (may need BMW MK3/4 navi unit because kodi is not capable)
Antworten
#72
the cd emulation of ibuscommunicator is working?
do you use the last addon testversion? https://github.com/harryberlin/repositor...1.3.6k.zip

bm and mfl buttons will work, if the addon detects the cd audio menu.

do you have ike high?

gpio7 setting is enabled?
IBusCommunicator:
Image <> Kodi Addon

[Bild: usersignaturpic-14941mspx.jpg]
Antworten
#73
(Gestern, 14:27)harryberlin schrieb: the cd emulation of ibuscommunicator is working?
do you use the last addon testversion? https://github.com/harryberlin/repositor...1.3.6k.zip

bm and mfl buttons will work, if the addon detects the cd audio menu.

do you have ike high?

gpio7 setting is enabled?

Cd emulation doesn't seem to work. Maybe because original cd changer is not ibus model?
ibuscommunicator version is 1.3.6k
Today I will try with cd cartridge filled to get cd player to work
Yes, all E38s have ike high model, I can get obc values visible in there
GPIO7 is enabled. Could this be grounding error from 12 V - 5 V DC-DC supply? I will try Reslers NTSC wire.

I have to make small steps with this because kids takes all my testing time in the evenings..
Antworten
#74
are you sure it's a bm24?
bm24 should understand ibus cd changer.
is your cd changer disconnected?

otherwise try tape mode.

runs the addon, or do you get an error after startup?
IBusCommunicator:
Image <> Kodi Addon

[Bild: usersignaturpic-14941mspx.jpg]
Antworten


Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste