Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Rasp on E53
#1
Hi. I have connected raspberry on E53 with ibuscomunnicator sw, but it doesn't work, pressing mode button, nothing change, it shows 96-97 track and nothing else, doesn't want to switch videos signal. Than have tried write raspcontrol sw and everything works fine on GPIO7 and TVmodul blue socket 17 pin. What I'am doing wrong ? I need change reading from NTCS to GPIO ? Develop mode and CTS turned off. And why I can't connect to wifi ?? Namely with ibuscomunnicator, It says something with network addons in osmc. I have been readead on author post that if I using GPIO7, I need turn on that function. I found only NTCS changing to GPIO function, is that I need to do ?
Zitieren
#2
yes, enable gpio setting. maybe restart the pi.
IBusCommunicator:
Image  <>  Kodi Addon

[Bild: usersignaturpic-14941mspx.jpg]
Zitieren
#3
Okey, thanks, everything work. Other question, if I connect bluetooth module to raspberry, can I use raspberry like handsfree function, when calling to me ? If I pickup, I will hear on speakers ?
Zitieren
#4
never tried to do hfp on rasp.
maybe, this will help:
https://scribles.net/hfp-on-raspberry-pi/
IBusCommunicator:
Image  <>  Kodi Addon

[Bild: usersignaturpic-14941mspx.jpg]
Zitieren
#5
Habe ein Raspberry Pi3B+ mit Resler Interface und bin ein NOOB hoch 10.

Das System läuft auf dem TV worauf ich breits sehr stolz bin, da ich bei Null gedtartet bin und keinIT Mensch bin.
Aber am E38 leider mit ähnlichen Problemen wie beim Tread Ersteller: cd 1-96 und mal cd 1-97.

Wie die GPIO7 aktiviert wird verstehe ich nicht, da die Einstellung zwar nach restart am tv übernommen ist aber der Fehler am Auto bleibt.
Zitieren
#6
welches image nutzt du?
IBusCommunicator:
Image  <>  Kodi Addon

[Bild: usersignaturpic-14941mspx.jpg]
Zitieren
#7
Das OSMC_ibus_usb_v8.7 ist auf der sd Karte im Pi.
Zitieren
#8
nimm das V2020.01-2 AVR DAC von hier:
https://www.bmwraspcontrol.de/board/show...hp?tid=438
und stell am tv die addonsettings auf default.
danach kannst wieder gpio7 aktivieren, wenn du es brauchst.
IBusCommunicator:
Image  <>  Kodi Addon

[Bild: usersignaturpic-14941mspx.jpg]
Zitieren
#9
IIst das der Punkt nutze GPIO statt NTSC (RTS) ?
Habe den aktiviert und neu gestartet ohne Ergebnis

Ist das mit Pin 17 in Stecker blau mit pin13/14 Stecker weiss vom Video Modul eine UND oder eine ODER Verbindung im das Bild einzuspeisen?
Zitieren
#10
ja, genau.

schau hier, du könntest aber auch direkt das grüne NTSC Kabel vom Interface nehmen.:
https://www.bmwraspcontrol.de/board/show...hp?tid=213
IBusCommunicator:
Image  <>  Kodi Addon

[Bild: usersignaturpic-14941mspx.jpg]
Zitieren


Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 2 Gast/Gäste