Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Need help with Pibus and RPi3B+
#91
Ok.

What I found is RPi.GPIO

From your post I figure it out that I need to test GPIO23, which is pin 16.

Code:
import RPi.GPIO as GPIO
import time
GPIO.setmode(GPIO.BOARD)
GPIO.setup(16, GPIO.OUT)

for i in range(20):
    GPIO.output(16,True)
    time.sleep(1)
    GPIO.output(16,False)
    time.sleep(1)
GPIO.cleanup()


And there's no sound. So I'm doing something wrong, or relay doesn't click.

Tried GPIO.BCM as well with pin 23. Same result.

[Bild: uRe1rjp.jpg][Bild: TjHvJoP.jpg]
Zitieren
#92
sorry gpio for rearcam is 27

python rpi gpio is not installed . you should get an exception.

check this:
https://raspberry-projects.com/pi/comman...mmand-line

and add 'sudo' as prefix to the commands
example: sudo echo "27" > /sys/class/gpio/export
IBusCommunicator:
Image  <>  Kodi Addon

[Bild: usersignaturpic-14941mspx.jpg]
Zitieren
#93
(13.04.2020, 20:36)harryberlin schrieb: sorry gpio for rearcam is 27

python rpi gpio is not installed . you should get an exception.

check this:
https://raspberry-projects.com/pi/comman...mmand-line

and add 'sudo' as prefix to the commands
example: sudo echo "27" > /sys/class/gpio/export

Ok. Will try tomorrow. It's dark already and laptop needs to be charged.

I installed rpi.gpio, wanted to install wiringpi, but git is down for it.

There's warning that GPIO23 is in use and still continues. So I think rpi.gpio works ok.

And I used that script with sudo. I have some experience with linux as I work in IT. Just never worked with RPi more than making it to show ads on TV at work Smile

[Bild: uRe1rjp.jpg][Bild: TjHvJoP.jpg]
Zitieren
#94
So there's no clicking.

used your link with those commands. Checked that value changes from 0 to 1 and back.
And there's no sound.

I could export gpio27 without sudo, but to write values I were forced to use sudo. Otherwise I would get permission denied.

[Bild: uRe1rjp.jpg][Bild: TjHvJoP.jpg]
Zitieren
#95
can you use a voltmeter to check the signal?
IBusCommunicator:
Image  <>  Kodi Addon

[Bild: usersignaturpic-14941mspx.jpg]
Zitieren
#96
Only if you will show where to measure. Because I don't have idea where to check it.

[Bild: uRe1rjp.jpg][Bild: TjHvJoP.jpg]
Zitieren
#97
GPIO to GND should have 3.3V at state 1
IBusCommunicator:
Image  <>  Kodi Addon

[Bild: usersignaturpic-14941mspx.jpg]
Zitieren
#98
So what should I do is remove pibus, take rpi and measure that GPIO27 pin at state 1?

[Bild: uRe1rjp.jpg][Bild: TjHvJoP.jpg]
Zitieren
#99
yes.
otherwise try to get usual pibus program get working. to be sure it's not an addon topic.
IBusCommunicator:
Image  <>  Kodi Addon

[Bild: usersignaturpic-14941mspx.jpg]
Zitieren
(16.04.2020, 20:10)harryberlin schrieb: yes.
otherwise try to get usual pibus program get working. to be sure it's not an addon topic.

Can't find my voltmeter. Need to buy new one.

But in that time I noticed that in settings under Rear Cam it says GPIO something and default value is 5. Is this correct?

[Bild: uRe1rjp.jpg][Bild: TjHvJoP.jpg]
Zitieren


Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 3 Gast/Gäste