single press tape back and forward is for left and right menu control.
Understood and that is how I have used the tape back and forward button.
If I shut off the develop mode (one that will pass on errors) while running in the SUV the Board-Monitor info screen doesn't show any information when I do this. If I enable the develop mode the Board Monitor Info screen looks fine with correct data.
Another concern is that when I am in the configuration of any plugin I cannot leave the configuration with the Home (right knob hold) key.
Rather with a keyboard attached I use the ESC key to exit the configuration and go to the home menu.
Understood and that is how I have used the tape back and forward button.
If I shut off the develop mode (one that will pass on errors) while running in the SUV the Board-Monitor info screen doesn't show any information when I do this. If I enable the develop mode the Board Monitor Info screen looks fine with correct data.
Another concern is that when I am in the configuration of any plugin I cannot leave the configuration with the Home (right knob hold) key.
Rather with a keyboard attached I use the ESC key to exit the configuration and go to the home menu.
- Automator
E46/E83 - CIS-IBus (2) - N3050 CPU 8Gb Ram (2) - LibreELEC (official): 9.2.0 - Confluence-BMW - IBus Communicator
E46 updates ==> Updated radio - 2004 model, newer ULF, MKIV.
E46/E83 - CIS-IBus (2) - N3050 CPU 8Gb Ram (2) - LibreELEC (official): 9.2.0 - Confluence-BMW - IBus Communicator
E46 updates ==> Updated radio - 2004 model, newer ULF, MKIV.