Ich hab jetzt mit Laptop und NavCoder geloggt. Raspi war also nicht am BUS.
Einfach Zündung auf 1 und nichts weiter gemacht. Sehe da paar sachen zwischen RAD und DSP aber ob da die Info dabei ist?
Kann ich noch anders loggen?
02.10.2015 13:06:12.572: LCM --> GLO : Lamp status: All_Off All_OK
02.10.2015 13:06:12.619: RLS --> LCM : Low beam/Park, Data="10 00"
02.10.2015 13:06:12.681: IKE --> ANZV: Update Text: Layout=Time Flags= F0="12:55PM"
02.10.2015 13:06:12.712: IKE --> GLO : Ignition status: Pos1_Acc
02.10.2015 13:06:12.759: VID --> BMBT: RGB control: LCD_on GT
02.10.2015 13:06:12.806: LCM --> GLO : Lamp status: All_Off All_OK
02.10.2015 13:06:12.837: IKE --> GLO : IKE sensor status:
02.10.2015 13:06:12.884: LCM --> GLO : Light dimmer: 255 (max)
02.10.2015 13:06:12.931: IKE --> ANZV: On-board computer special indicators: Aux_Heating_LED = Off
02.10.2015 13:06:12.978: CCM --> GLO : Checkcontrol sensors: Key_in_Ignition
02.10.2015 13:06:13.025: IKE --> LCM : Service Interval Display: Total dist 191300 kms; SI-L 730 litres since last service; ; SI-T 0 days since last service
02.10.2015 13:06:13.072: RAD --> GLO : Device status ready after Reset after Reset
02.10.2015 13:06:13.103: RAD --> BMBT: Cassette control: Power_On
02.10.2015 13:06:13.150: RAD --> NAV : Device status ready after Reset after Reset
02.10.2015 13:06:13.197: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:13.244: GT --> GLO : Device status ready Bit6
02.10.2015 13:06:13.291: RAD --> DSP : Device status request
02.10.2015 13:06:13.337: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:06:13.384: GM --> GLO : ChkCtrl Remote Central Locking: No_Button_Pressed
02.10.2015 13:06:13.431: GM --> GLO : Doors/flaps status: Open: Ctrl_Locking: Unlocked
02.10.2015 13:06:13.494: IKE --> GLO : Ignition status: Pos1_Acc
02.10.2015 13:06:13.541: IKE --> ANZV: On-board computer special indicators: Aux_Heating_LED = Off
02.10.2015 13:06:13.587: EWS --> GLO : Immobiliser status: Immobilisation_deactivated Valid_key_detected Key_1
02.10.2015 13:06:13.634: NAV --> GTF : Remote control status, Data="21"
02.10.2015 13:06:13.681: AB --> GLO : Remote control central locking status, Data="03 00 0F"
02.10.2015 13:06:13.728: GT --> RAD : Radio status request, Data="11"
02.10.2015 13:06:13.791: RAD --> GT : LCD clear: No display required
02.10.2015 13:06:13.837: MFL --> LOC : Radio/Telephone control: No_buttons_pressed
02.10.2015 13:06:13.884: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:06:13.931: GT --> NAJ : RGB control: LCD_off GT
02.10.2015 13:06:13.994: GT --> BMBT: Cassette control: State_unknown, Data="90"
02.10.2015 13:06:14.041: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:14.087: GT --> RAD : Radio status request, Data="11"
02.10.2015 13:06:14.134: GT --> DSP : DSP equaliser button, Data="28"
02.10.2015 13:06:14.181: RAD --> GT : LCD clear: No display required
02.10.2015 13:06:14.244: GT --> RAD : Audio source selection
02.10.2015 13:06:14.291: MFL --> TEL : Device status request
02.10.2015 13:06:14.337: IKE --> ANZV: Update Text: Layout=Time Flags= F0="12:56PM"
02.10.2015 13:06:14.650: MFL --> SES : Device status request
02.10.2015 13:06:14.728: GT --> BMBT: Device status request
02.10.2015 13:06:14.775: BMBT --> GT : Device status ready Bit4 Bit5
02.10.2015 13:06:14.884: RAD --> BMBT: Cassette control: State_unknown, Data="90"
02.10.2015 13:06:14.931: RAD --> BMBT: Cassette control: State_unknown, Data="5F"
02.10.2015 13:06:14.978: RAD --> CDCD: CD_control: Status_Request
02.10.2015 13:06:15.025: RAD --> CDC : CD_control: Status_Request
02.10.2015 13:06:15.087: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:15.134: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:15.181: RAD --> BMBT: Cassette control: Power_On
02.10.2015 13:06:15.228: RAD --> BMBT: Cassette control: State_unknown, Data="48"
02.10.2015 13:06:15.291: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:15.337: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:15.431: DSP --> LOC : Device status ready after Reset after Reset
02.10.2015 13:06:15.478: IKE --> GLO : Ignition status: Pos1_Acc
02.10.2015 13:06:15.541: IKE --> ANZV: On-board computer special indicators: Aux_Heating_LED = Off
02.10.2015 13:06:15.588: RAD --> DSP : Audio_control: Source = Off
02.10.2015 13:06:15.634: RAD --> DSP : Audio_control: Fader = Center0
02.10.2015 13:06:15.681: RAD --> DSP : Audio_control: Balance = Center_0
02.10.2015 13:06:15.728: RAD --> DSP : Audio_control: Treble = 0
02.10.2015 13:06:15.791: RAD --> DSP : Audio_control: Bass = 0
02.10.2015 13:06:15.838: RAD --> DSP : Audio_control: DSP_Function 0
02.10.2015 13:06:15.884: RAD --> DSP : Audio_control: DSP_Function 3
02.10.2015 13:06:15.947: RAD --> DSP : Audio_control: Source = Off
02.10.2015 13:06:16.009: RAD --> DSP : Audio_control: Fader = Center0
02.10.2015 13:06:16.056: RAD --> DSP : Audio_control: Balance = Center_0
02.10.2015 13:06:16.103: RAD --> DSP : Audio_control: Treble = 0
02.10.2015 13:06:16.150: RAD --> DSP : Audio_control: Bass = 0
02.10.2015 13:06:16.197: RAD --> DSP : Audio_control: DSP_Function 0
02.10.2015 13:06:16.244: RAD --> DSP : Audio_control: DSP_Function 3
02.10.2015 13:06:16.306: RAD --> CDC : CD_control: Pause
02.10.2015 13:06:16.353: RAD --> CDC : CD_control: Status_Request
02.10.2015 13:06:16.400: RAD --> DSP : Device status request
02.10.2015 13:06:16.447: DSP --> LOC : Device status ready
02.10.2015 13:06:16.525: AB --> GLO : Remote control central locking status, Data="02 00 0F"
02.10.2015 13:06:16.572: AB --> GLO : Remote control central locking status, Data="02 00 0A"
02.10.2015 13:06:17.213: MFL --> SES : Device status request
02.10.2015 13:06:17.822: MFL --> TEL : Device status request
02.10.2015 13:06:17.900: AB --> GLO : Remote control central locking status, Data="00 00 1A"
02.10.2015 13:06:18.009: RAD --> BMBT: Cassette control: State_unknown, Data="48"
02.10.2015 13:06:18.056: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:18.306: RAD --> DSP : Audio_control: Treble = +6
02.10.2015 13:06:18.353: RAD --> DSP : Audio_control: Bass = +4
02.10.2015 13:06:18.400: RAD --> DSP : Audio_control: Source = Off
02.10.2015 13:06:18.463: RAD --> DSP : Audio_control: Source = Tuner/Tape
02.10.2015 13:06:18.509: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.556: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.603: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.666: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.713: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.759: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.806: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.853: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.900: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.963: RAD --> DSP : Volume Control: Increase 2 steps
02.10.2015 13:06:22.322: MFL --> SES : Device status request
02.10.2015 13:06:22.619: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:06:22.728: BMBT --> RAD : Device status request
02.10.2015 13:06:22.775: RAD --> GLO : Device status ready
02.10.2015 13:06:22.838: NAV --> RAD : TMC status request, Update_Class=10
02.10.2015 13:06:22.885: NAV --> RAD : TMC status request, Update_Class=30
02.10.2015 13:06:22.931: RAD --> NAV : TMC data: Type37: Data="13"
02.10.2015 13:06:22.978: RAD --> NAV : TMC data: Type3F: Data="00"
02.10.2015 13:06:23.025: RAD --> IKE : Country coding status request
02.10.2015 13:06:23.072: NAV --> RAD : TMC status request, Update_Class=10
02.10.2015 13:06:23.119: IKE --> GLO : Country coding status: Ntwk=E38/E39 Lang=DE_German Clock=12h OutTemp=°C AvgSpd=km/h Limit=km Dist=km ArrTime=24h Consump=l/100_km Motor=Petrol
02.10.2015 13:06:23.166: NAV --> RAD : TMC status request, Update_Class=30
02.10.2015 13:06:23.228: RAD --> NAV : TMC data: Type37: Data="13"
02.10.2015 13:06:23.275: NAV --> RAD : TMC status request, Update_Class=31
02.10.2015 13:06:23.322: RAD --> NAV : TMC data: Type32: Data="08"
02.10.2015 13:06:23.369: MFL --> TEL : Device status request
02.10.2015 13:06:24.728: GT --> IKE : Device status request
02.10.2015 13:06:24.791: IKE --> GLO : Device status ready
02.10.2015 13:06:32.635: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:06:32.744: BMBT --> RAD : Device status request
02.10.2015 13:06:32.791: RAD --> GLO : Device status ready
02.10.2015 13:06:32.838: RAD --> DSP : Device status request
02.10.2015 13:06:32.885: DSP --> LOC : Device status ready
02.10.2015 13:06:33.697: NAV --> IKE : Time & date: UTC 11:02 02 Oktober 2015
02.10.2015 13:06:34.744: GT --> DSP : Device status request
02.10.2015 13:06:34.807: DSP --> LOC : Device status ready
02.10.2015 13:06:34.853: RAD --> CDCD: CD_control: Status_Request
02.10.2015 13:06:34.900: RAD --> CDC : CD_control: Status_Request
02.10.2015 13:06:41.104: NAV --> TEL : Telephone data: Current_phone_status Count_0
02.10.2015 13:06:41.182: NAV --> TEL : Telephone data: Current_network_request Count_0
02.10.2015 13:06:42.651: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:06:42.760: BMBT --> RAD : Device status request
02.10.2015 13:06:42.807: RAD --> GLO : Device status ready
02.10.2015 13:06:44.760: GT --> TEL : Device status request
02.10.2015 13:06:51.401: NAV --> TEL : Telephone data: Current_network_request Count_0
02.10.2015 13:06:51.541: NAV --> TEL : Telephone data: Current_phone_status Count_0
02.10.2015 13:06:52.682: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:06:52.776: BMBT --> RAD : Device status request
02.10.2015 13:06:52.838: RAD --> GLO : Device status ready
02.10.2015 13:06:52.885: RAD --> DSP : Device status request
02.10.2015 13:06:52.932: DSP --> LOC : Device status ready
02.10.2015 13:06:54.760: GT --> VID : Device status request
02.10.2015 13:06:54.823: VID --> GT : Device status ready
02.10.2015 13:06:54.870: RAD --> CDCD: CD_control: Status_Request
02.10.2015 13:06:54.901: RAD --> CDC : CD_control: Status_Request
02.10.2015 13:07:01.307: NAV --> TEL : Telephone data: Current_network_request Count_0
02.10.2015 13:07:01.385: NAV --> TEL : Telephone data: Current_phone_status Count_0
02.10.2015 13:07:02.682: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:07:02.807: BMBT --> RAD : Device status request
02.10.2015 13:07:02.854: RAD --> GLO : Device status ready
02.10.2015 13:07:04.776: GT --> BMBT: Device status request
02.10.2015 13:07:04.823: BMBT --> GT : Device status ready Bit4 Bit5
02.10.2015 13:07:11.401: NAV --> TEL : Telephone data: Current_network_request Count_0
02.10.2015 13:07:11.511: NAV --> TEL : Telephone data: Current_phone_status Count_0
02.10.2015 13:07:12.745: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:07:12.823: RAD --> DSP : Device status request
02.10.2015 13:07:12.870: DSP --> LOC : Device status ready
02.10.2015 13:07:12.917: BMBT --> RAD : Device status request
02.10.2015 13:07:12.979: RAD --> GLO : Device status ready
02.10.2015 13:07:14.323: IKE --> ANZV: Update Text: Layout=Time Flags= F0="12:57PM"
02.10.2015 13:07:14.807: GT --> IKE : Device status request
02.10.2015 13:07:14.854: IKE --> GLO : Device status ready
02.10.2015 13:07:14.901: RAD --> CDCD: CD_control: Status_Request
02.10.2015 13:07:14.948: RAD --> CDC : CD_control: Status_Request
02.10.2015 13:07:19.354: IKE --> GLO : Ignition status: Off
02.10.2015 13:07:19.417: RAD --> BMBT: Cassette control: Power_Off
02.10.2015 13:07:19.464: CCM --> GLO : Checkcontrol sensors: Key_in_Ignition
02.10.2015 13:07:19.511: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:07:19.558: CCM --> IKE : IKE Text/Gong: " " Immediate Clear Gong_off Warning_symbol_off
02.10.2015 13:07:19.604: IKE --> CCM : IKE text status: 0 text messages acknowledged
02.10.2015 13:07:19.651: RAD --> DSP : Audio_control: Source = Off
02.10.2015 13:07:19.714: AB --> GLO : Remote control central locking status, Data="00 00 1B"
02.10.2015 13:07:19.761: AB --> GLO : Remote control central locking status, Data="00 00 1F"
02.10.2015 13:07:19.948: AB --> GLO : Remote control central locking status, Data="02 00 3F"
02.10.2015 13:07:20.417: EWS --> GLO : Immobiliser status: Valid_key_detected Key_1
Edit: oder muss ich beim Aufschliessen des Autos schon bereits loggen?
Edit2: oder muss auch der Raspi mit kommunizieren. Das kann ich mit nur einem Resler aber nicht.
Wird von HelgeInterface auch ALLES geloggt was auf dem BUS passiert?
Einfach Zündung auf 1 und nichts weiter gemacht. Sehe da paar sachen zwischen RAD und DSP aber ob da die Info dabei ist?
Kann ich noch anders loggen?
Spoiler!
02.10.2015 13:06:12.572: LCM --> GLO : Lamp status: All_Off All_OK
02.10.2015 13:06:12.619: RLS --> LCM : Low beam/Park, Data="10 00"
02.10.2015 13:06:12.681: IKE --> ANZV: Update Text: Layout=Time Flags= F0="12:55PM"
02.10.2015 13:06:12.712: IKE --> GLO : Ignition status: Pos1_Acc
02.10.2015 13:06:12.759: VID --> BMBT: RGB control: LCD_on GT
02.10.2015 13:06:12.806: LCM --> GLO : Lamp status: All_Off All_OK
02.10.2015 13:06:12.837: IKE --> GLO : IKE sensor status:
02.10.2015 13:06:12.884: LCM --> GLO : Light dimmer: 255 (max)
02.10.2015 13:06:12.931: IKE --> ANZV: On-board computer special indicators: Aux_Heating_LED = Off
02.10.2015 13:06:12.978: CCM --> GLO : Checkcontrol sensors: Key_in_Ignition
02.10.2015 13:06:13.025: IKE --> LCM : Service Interval Display: Total dist 191300 kms; SI-L 730 litres since last service; ; SI-T 0 days since last service
02.10.2015 13:06:13.072: RAD --> GLO : Device status ready after Reset after Reset
02.10.2015 13:06:13.103: RAD --> BMBT: Cassette control: Power_On
02.10.2015 13:06:13.150: RAD --> NAV : Device status ready after Reset after Reset
02.10.2015 13:06:13.197: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:13.244: GT --> GLO : Device status ready Bit6
02.10.2015 13:06:13.291: RAD --> DSP : Device status request
02.10.2015 13:06:13.337: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:06:13.384: GM --> GLO : ChkCtrl Remote Central Locking: No_Button_Pressed
02.10.2015 13:06:13.431: GM --> GLO : Doors/flaps status: Open: Ctrl_Locking: Unlocked
02.10.2015 13:06:13.494: IKE --> GLO : Ignition status: Pos1_Acc
02.10.2015 13:06:13.541: IKE --> ANZV: On-board computer special indicators: Aux_Heating_LED = Off
02.10.2015 13:06:13.587: EWS --> GLO : Immobiliser status: Immobilisation_deactivated Valid_key_detected Key_1
02.10.2015 13:06:13.634: NAV --> GTF : Remote control status, Data="21"
02.10.2015 13:06:13.681: AB --> GLO : Remote control central locking status, Data="03 00 0F"
02.10.2015 13:06:13.728: GT --> RAD : Radio status request, Data="11"
02.10.2015 13:06:13.791: RAD --> GT : LCD clear: No display required
02.10.2015 13:06:13.837: MFL --> LOC : Radio/Telephone control: No_buttons_pressed
02.10.2015 13:06:13.884: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:06:13.931: GT --> NAJ : RGB control: LCD_off GT
02.10.2015 13:06:13.994: GT --> BMBT: Cassette control: State_unknown, Data="90"
02.10.2015 13:06:14.041: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:14.087: GT --> RAD : Radio status request, Data="11"
02.10.2015 13:06:14.134: GT --> DSP : DSP equaliser button, Data="28"
02.10.2015 13:06:14.181: RAD --> GT : LCD clear: No display required
02.10.2015 13:06:14.244: GT --> RAD : Audio source selection
02.10.2015 13:06:14.291: MFL --> TEL : Device status request
02.10.2015 13:06:14.337: IKE --> ANZV: Update Text: Layout=Time Flags= F0="12:56PM"
02.10.2015 13:06:14.650: MFL --> SES : Device status request
02.10.2015 13:06:14.728: GT --> BMBT: Device status request
02.10.2015 13:06:14.775: BMBT --> GT : Device status ready Bit4 Bit5
02.10.2015 13:06:14.884: RAD --> BMBT: Cassette control: State_unknown, Data="90"
02.10.2015 13:06:14.931: RAD --> BMBT: Cassette control: State_unknown, Data="5F"
02.10.2015 13:06:14.978: RAD --> CDCD: CD_control: Status_Request
02.10.2015 13:06:15.025: RAD --> CDC : CD_control: Status_Request
02.10.2015 13:06:15.087: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:15.134: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:15.181: RAD --> BMBT: Cassette control: Power_On
02.10.2015 13:06:15.228: RAD --> BMBT: Cassette control: State_unknown, Data="48"
02.10.2015 13:06:15.291: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:15.337: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:15.431: DSP --> LOC : Device status ready after Reset after Reset
02.10.2015 13:06:15.478: IKE --> GLO : Ignition status: Pos1_Acc
02.10.2015 13:06:15.541: IKE --> ANZV: On-board computer special indicators: Aux_Heating_LED = Off
02.10.2015 13:06:15.588: RAD --> DSP : Audio_control: Source = Off
02.10.2015 13:06:15.634: RAD --> DSP : Audio_control: Fader = Center0
02.10.2015 13:06:15.681: RAD --> DSP : Audio_control: Balance = Center_0
02.10.2015 13:06:15.728: RAD --> DSP : Audio_control: Treble = 0
02.10.2015 13:06:15.791: RAD --> DSP : Audio_control: Bass = 0
02.10.2015 13:06:15.838: RAD --> DSP : Audio_control: DSP_Function 0
02.10.2015 13:06:15.884: RAD --> DSP : Audio_control: DSP_Function 3
02.10.2015 13:06:15.947: RAD --> DSP : Audio_control: Source = Off
02.10.2015 13:06:16.009: RAD --> DSP : Audio_control: Fader = Center0
02.10.2015 13:06:16.056: RAD --> DSP : Audio_control: Balance = Center_0
02.10.2015 13:06:16.103: RAD --> DSP : Audio_control: Treble = 0
02.10.2015 13:06:16.150: RAD --> DSP : Audio_control: Bass = 0
02.10.2015 13:06:16.197: RAD --> DSP : Audio_control: DSP_Function 0
02.10.2015 13:06:16.244: RAD --> DSP : Audio_control: DSP_Function 3
02.10.2015 13:06:16.306: RAD --> CDC : CD_control: Pause
02.10.2015 13:06:16.353: RAD --> CDC : CD_control: Status_Request
02.10.2015 13:06:16.400: RAD --> DSP : Device status request
02.10.2015 13:06:16.447: DSP --> LOC : Device status ready
02.10.2015 13:06:16.525: AB --> GLO : Remote control central locking status, Data="02 00 0F"
02.10.2015 13:06:16.572: AB --> GLO : Remote control central locking status, Data="02 00 0A"
02.10.2015 13:06:17.213: MFL --> SES : Device status request
02.10.2015 13:06:17.822: MFL --> TEL : Device status request
02.10.2015 13:06:17.900: AB --> GLO : Remote control central locking status, Data="00 00 1A"
02.10.2015 13:06:18.009: RAD --> BMBT: Cassette control: State_unknown, Data="48"
02.10.2015 13:06:18.056: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:06:18.306: RAD --> DSP : Audio_control: Treble = +6
02.10.2015 13:06:18.353: RAD --> DSP : Audio_control: Bass = +4
02.10.2015 13:06:18.400: RAD --> DSP : Audio_control: Source = Off
02.10.2015 13:06:18.463: RAD --> DSP : Audio_control: Source = Tuner/Tape
02.10.2015 13:06:18.509: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.556: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.603: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.666: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.713: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.759: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.806: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.853: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.900: RAD --> DSP : Volume Control: Increase 3 steps
02.10.2015 13:06:18.963: RAD --> DSP : Volume Control: Increase 2 steps
02.10.2015 13:06:22.322: MFL --> SES : Device status request
02.10.2015 13:06:22.619: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:06:22.728: BMBT --> RAD : Device status request
02.10.2015 13:06:22.775: RAD --> GLO : Device status ready
02.10.2015 13:06:22.838: NAV --> RAD : TMC status request, Update_Class=10
02.10.2015 13:06:22.885: NAV --> RAD : TMC status request, Update_Class=30
02.10.2015 13:06:22.931: RAD --> NAV : TMC data: Type37: Data="13"
02.10.2015 13:06:22.978: RAD --> NAV : TMC data: Type3F: Data="00"
02.10.2015 13:06:23.025: RAD --> IKE : Country coding status request
02.10.2015 13:06:23.072: NAV --> RAD : TMC status request, Update_Class=10
02.10.2015 13:06:23.119: IKE --> GLO : Country coding status: Ntwk=E38/E39 Lang=DE_German Clock=12h OutTemp=°C AvgSpd=km/h Limit=km Dist=km ArrTime=24h Consump=l/100_km Motor=Petrol
02.10.2015 13:06:23.166: NAV --> RAD : TMC status request, Update_Class=30
02.10.2015 13:06:23.228: RAD --> NAV : TMC data: Type37: Data="13"
02.10.2015 13:06:23.275: NAV --> RAD : TMC status request, Update_Class=31
02.10.2015 13:06:23.322: RAD --> NAV : TMC data: Type32: Data="08"
02.10.2015 13:06:23.369: MFL --> TEL : Device status request
02.10.2015 13:06:24.728: GT --> IKE : Device status request
02.10.2015 13:06:24.791: IKE --> GLO : Device status ready
02.10.2015 13:06:32.635: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:06:32.744: BMBT --> RAD : Device status request
02.10.2015 13:06:32.791: RAD --> GLO : Device status ready
02.10.2015 13:06:32.838: RAD --> DSP : Device status request
02.10.2015 13:06:32.885: DSP --> LOC : Device status ready
02.10.2015 13:06:33.697: NAV --> IKE : Time & date: UTC 11:02 02 Oktober 2015
02.10.2015 13:06:34.744: GT --> DSP : Device status request
02.10.2015 13:06:34.807: DSP --> LOC : Device status ready
02.10.2015 13:06:34.853: RAD --> CDCD: CD_control: Status_Request
02.10.2015 13:06:34.900: RAD --> CDC : CD_control: Status_Request
02.10.2015 13:06:41.104: NAV --> TEL : Telephone data: Current_phone_status Count_0
02.10.2015 13:06:41.182: NAV --> TEL : Telephone data: Current_network_request Count_0
02.10.2015 13:06:42.651: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:06:42.760: BMBT --> RAD : Device status request
02.10.2015 13:06:42.807: RAD --> GLO : Device status ready
02.10.2015 13:06:44.760: GT --> TEL : Device status request
02.10.2015 13:06:51.401: NAV --> TEL : Telephone data: Current_network_request Count_0
02.10.2015 13:06:51.541: NAV --> TEL : Telephone data: Current_phone_status Count_0
02.10.2015 13:06:52.682: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:06:52.776: BMBT --> RAD : Device status request
02.10.2015 13:06:52.838: RAD --> GLO : Device status ready
02.10.2015 13:06:52.885: RAD --> DSP : Device status request
02.10.2015 13:06:52.932: DSP --> LOC : Device status ready
02.10.2015 13:06:54.760: GT --> VID : Device status request
02.10.2015 13:06:54.823: VID --> GT : Device status ready
02.10.2015 13:06:54.870: RAD --> CDCD: CD_control: Status_Request
02.10.2015 13:06:54.901: RAD --> CDC : CD_control: Status_Request
02.10.2015 13:07:01.307: NAV --> TEL : Telephone data: Current_network_request Count_0
02.10.2015 13:07:01.385: NAV --> TEL : Telephone data: Current_phone_status Count_0
02.10.2015 13:07:02.682: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:07:02.807: BMBT --> RAD : Device status request
02.10.2015 13:07:02.854: RAD --> GLO : Device status ready
02.10.2015 13:07:04.776: GT --> BMBT: Device status request
02.10.2015 13:07:04.823: BMBT --> GT : Device status ready Bit4 Bit5
02.10.2015 13:07:11.401: NAV --> TEL : Telephone data: Current_network_request Count_0
02.10.2015 13:07:11.511: NAV --> TEL : Telephone data: Current_phone_status Count_0
02.10.2015 13:07:12.745: RLS --> LCM : Low beam/Park, Data="50 00"
02.10.2015 13:07:12.823: RAD --> DSP : Device status request
02.10.2015 13:07:12.870: DSP --> LOC : Device status ready
02.10.2015 13:07:12.917: BMBT --> RAD : Device status request
02.10.2015 13:07:12.979: RAD --> GLO : Device status ready
02.10.2015 13:07:14.323: IKE --> ANZV: Update Text: Layout=Time Flags= F0="12:57PM"
02.10.2015 13:07:14.807: GT --> IKE : Device status request
02.10.2015 13:07:14.854: IKE --> GLO : Device status ready
02.10.2015 13:07:14.901: RAD --> CDCD: CD_control: Status_Request
02.10.2015 13:07:14.948: RAD --> CDC : CD_control: Status_Request
02.10.2015 13:07:19.354: IKE --> GLO : Ignition status: Off
02.10.2015 13:07:19.417: RAD --> BMBT: Cassette control: Power_Off
02.10.2015 13:07:19.464: CCM --> GLO : Checkcontrol sensors: Key_in_Ignition
02.10.2015 13:07:19.511: BMBT --> RAD : Cassette status: No_Tape
02.10.2015 13:07:19.558: CCM --> IKE : IKE Text/Gong: " " Immediate Clear Gong_off Warning_symbol_off
02.10.2015 13:07:19.604: IKE --> CCM : IKE text status: 0 text messages acknowledged
02.10.2015 13:07:19.651: RAD --> DSP : Audio_control: Source = Off
02.10.2015 13:07:19.714: AB --> GLO : Remote control central locking status, Data="00 00 1B"
02.10.2015 13:07:19.761: AB --> GLO : Remote control central locking status, Data="00 00 1F"
02.10.2015 13:07:19.948: AB --> GLO : Remote control central locking status, Data="02 00 3F"
02.10.2015 13:07:20.417: EWS --> GLO : Immobiliser status: Valid_key_detected Key_1
Edit: oder muss ich beim Aufschliessen des Autos schon bereits loggen?
Edit2: oder muss auch der Raspi mit kommunizieren. Das kann ich mit nur einem Resler aber nicht.
Wird von HelgeInterface auch ALLES geloggt was auf dem BUS passiert?